Zitat:
Original geschrieben von tones
Hi, i am the owner of a 99 156 2.5. On start up there is a very short slipping/screech. This has gotten worse over the past number of weeks. I am thinking that it is the tension of the pully belt ( poly V etc ). Am i right, could it be the pully wheel bearings??
On looking at the belt it does appaer to have a little bit too much movement ( when pushed with fingers it moves abour 1/2 inch + ).
Can anyone offer advice on the procedure for increasing the tension.
A commomn question seems to be people looking for service manulas/cd's......do any exist or where can one get information for DIY work..
Thanking you in advance......Tony c Ireland....
|
Hi Tony,
lots of questions, I try to be succinct:
1. it's possible that the tensioner pulley is worn, it could be also
that the bearing of the pulley is at the end of its lifespan.
Depends a little on the mileage.
2. I can't give you an idea how to increase the tension, sorry.
3. There are workshop CD in the market. While I don't know if
the Fanshop/Tuningshop/Mercato here in 'alfisti.net' is selling
them, but you can of course post a Search in the mercato.
(see buttons on the top)
Ciao
Joachim
Linear-Darstellung
