PDA

Vollständige Version anzeigen : 145 boxer problem


sinisa
26.11.2002, 18:35
hi,i am a new user in this forum and i already have a question.My 145 with 1.4 boxer won't start!
I drove it till that point normally,but two or free times car ,i do not know ,jumped(rev falls from 4000 to 1000).When I got home, i turned the engine once again,it worked normally but once it almost
shutted down buy itself.I turned it off, pulled out the key,went home,and when i tried to start the car after 2-3 hours no way!!
I mean,the starter works but there is no sign that the engine will start.Please give me some advice.I don't know which CPU is in my car I think it is Magnetti Marelli.The car is 1995 145 boxer 1351ccm

gfc
26.11.2002, 19:36
Original geschrieben von sinisa
hi,i am a new user in this forum and i already have a question.My 145 with 1.4 boxer won't start!
I drove it till that point normally,but two or free times car ,i do not know ,jumped(rev falls from 4000 to 1000).When I got home, i turned the engine once again,it worked normally but once it almost
shutted down buy itself.I turned it off, pulled out the key,went home,and when i tried to start the car after 2-3 hours no way!!
I mean,the starter works but there is no sign that the engine will start.Please give me some advice.I don't know which CPU is in my car I think it is Magnetti Marelli.The car is 1995 145 boxer 1351ccm

First: Turn the light off
second: Try to turn longer, m TwinSpark needs 10seconds to start, but it works fine!

sinisa
26.11.2002, 20:59
Thanks,I'll try that

Felleas
11.12.2002, 17:11
Well try changing your distributor and the sparkplugs,try also installing better sparkplugs wires.
Try all this and you want experiance any problems for another 50k km!
This did the job for me on my ex-145 1.4 boxer

sinisa
12.12.2002, 23:02
Thanks but i have already fixed this problem,the relay which controls the fuel pump is replaced and now the car runs like new!
Can you tell me how the control lamps in instrument panel should be replaced? thanks!